ESW-R4180LK/ESW-R4180DAN

Checking the network mode (ESW-R4180DAN only)

  1. Press the reset button with a pin that has a thin tip by inserting this pin slowly in a straight manner.

    • The status indicator lamp flashes.

    1. Reset button
    2. Status indicator lamp
    Status indicator lamp display Network mode
    Flashing in green (five times) Auto
    Flashing in orange (five times) Static

Resetting the network (ESW-R4180DAN only)

The following network settings will be returned to their factory default values. This is useful in, for example, returning the network mode to “Auto” when the IP address is unknown.

  • IP Setting
  • Remote Control
  • Syslog
  • NTP Setting

  1. Press and hold (approximately 3 seconds) the reset button with a pin that has a thin tip by inserting this pin slowly in a straight manner.

    • The status and link indicator lamps light alternately in red and orange.

    1. Reset button
    2. Status indicator lamp
    3. Link indicator lamp

  2. Quickly press the reset button while the status and link indicator lamps are lighting alternately.

    • If no operations are performed for approximately 5 seconds after the status and link indicator lamps start lighting alternately, the device will return to normal operation mode.

    A network reset will be executed. After the network reset, the device will automatically restart.

  • While resetting or restarting is in progress, do not pull out the cable connected to the receiver.

Performing a factory reset

All settings will be returned to their factory default values.

  1. Press and hold (8 seconds or more) the reset button with a pin that has a thin tip by inserting this pin slowly in a straight manner.

    • The status and link indicator lamps light alternately in green and orange.

    1. Reset button
    2. Status indicator lamp
    3. Link indicator lamp

  2. Quickly press the reset button while the status and link indicator lamps are lighting alternately.

    • If no operations are performed for approximately 5 seconds after the status and link indicator lamps start lighting alternately, the device will return to normal operation mode.

    A factory reset will be executed. After the factory reset, the device will automatically restart.

  • You can also execute factory resets from Wireless Manager.
  • While resetting or restarting is in progress, do not pull out the cable connected to the receiver.