Camera

Device

Item	Description
Enabled	Set the camera linking function. Setting to “ON” (blue) will enable the camera linking function.
Protocol[1]	Select the protocol to be used.
IP Address[1]	Enter the IP address of the camera to be used.
Port Number[1]	Set as follows depending on the protocol to be used. VISCA over IP: 52381[2] Panasonic: Port number set on the camera

[1] This is possible when “Enabled” is set to “ON” (blue).

[2] VISCA over IP is a communication standard developed by Sony Corporation, designed for remote camera control over IP networks. According to the specification, the designated communication port is “52381.” To enable the camera linking function using the VISCA over IP protocol, set the port number to “52381” in the port number setting.

Talk Setting

Item	Description
Talk To Recall Preset	Set the number of seconds after a speaker starts talking before the camera preset is recalled (the camera moves). Set this function to prevent the camera from moving immediately whenever a short utterance is made, etc.

Silent Setting

Item	Description
Enabled	Set a silent time. Setting to “ON” (blue) will enable the silent time setting.
Time To Go Back Home[1]	Set the number of seconds of silence before the camera preset is recalled (the camera returns to a position). Set this function to project the entire scene instead of focusing on a specific person when there is silence.
Position[1]	Set where the camera will return when there is silence.

[1] This is possible when “Enabled” is set to “ON” (blue).