Zone layout presets

Up to 10 settings for beam zones and Camera Areas can be saved as zone layout presets. These are convenient if used as templates for creating presets.

Saving zone layout presets

1. Select a microphone in the main area.

   The microphone settings screen appears.

2. Click “Beam”.

   

3. Click “Zone Layout Preset (None)”.

   • “Zone Layout Preset (None)” shows the name of the selected zone layout preset.

   

4. Click “Save Zone Layout Preset”.

   

5. Click the slot where the zone layout preset is to be saved.

   

6. Enter a name.

   • Entry is possible by clicking on the name.

   

7. Click “Save”.

   

   Settings for the beam zone and Camera Area of the selected microphone are saved as a zone layout preset.

	Zone layout presets are saved in the software application, enabling their use in other projects. For information on importing and exporting zone layout presets, see Zone Layout Library (Presets).

Recalling zone layout presets

1. Select a microphone in the main area.

   The microphone settings screen appears.

2. Click “Beam”.

   

3. Click “Zone Layout Preset (None)”.

   • “Zone Layout Preset (None)” shows the name of the selected zone layout preset.

   

4. Click the zone layout preset to be recalled.

   

   The zone layout preset settings are reflected in the selected microphone.