Overview of the audio settings screen

The displayed settings will vary depending on the selected DSP mode.

Mode Setting
AEC mode AGC, Auto Mix, AEC, NC
Voice Lift mode Voice Lift, Auto Mix

AEC mode

  1. Coverage channel (CH1)

    This is the audio channel used for sound pickup from the Coverage Zone.

  2. Channel menu

    Click to select the channel menu.

  3. Priority 1 to Priority 5 channels (CH2 to CH6)

    These audio channels are used for sound pickup from each Priority Zone.

  4. Analog Input channel

    This audio input channel is for establishing analog connections with external microphones.

  5. Auto Mix channel

    This audio output channel is mixed with auto mix.

  6. Analog Output channel

    This audio output channel is an analog conversion of the Auto Mix channel.

  7. Channel audio settings

    Make audio settings tailored to each channel type.

  8. Selected microphone(s)

    Displays selected microphones.

  9. Advanced audio settings

    Displays advanced audio settings (AGC / Auto Mix / AEC / NC).

Voice Lift mode

  1. Coverage channel (CH1)

    This is the audio channel used for sound pickup from the Coverage Zone.

  2. Channel menu

    Click to select the channel menu.

  3. Priority 1 to Priority 5 channels (CH2 to CH6)

    These audio channels are used for sound pickup from each Priority Zone.

  4. Analog Input channel

    This audio input channel is for establishing analog connections with external microphones.

  5. Auto Mix channel

    This audio output channel is mixed with auto mix.

  6. Analog Output channel

    This audio output channel is an analog conversion of the Auto Mix channel.

  7. Voice Lift channel

    This audio output channel is used in Voice Lift mode.

  8. Channel audio settings

    Make audio settings tailored to each channel type.

  9. Selected microphone(s)

    Displays selected microphones.

  10. Advanced audio settings

    Displays advanced audio settings (Voice Lift / Auto Mix).

Switching DSP mode

Settings can be configured by selecting “System Settings” > “Audio” > “DSP Mode” on the Settings & Maintenance screen.