Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• Wear the headphones to hear voice guidance during pairing.

1. Remove the headphones (L (left) and R (right)) from the charging case.

   • The indicator lamps on the headphones will light in white, and then flash.

   

2. Use your Bluetooth device to begin the pairing process and search for the product. When your Bluetooth device finds the product, “ATH-SQ1TW2” will be displayed on the device.

   • For information about using your Bluetooth device, refer to the device’s user manual.

3. Select “ATH-SQ1TW2” to pair the product and your Bluetooth device.

   • Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode, PIN code, PIN number, or password.

   

   The voice guidance will play the message “Connected”, and the indicator lamps on the headphones will flash slowly in white. This indicates pairing was successfully completed.

Pairing with Fast Pair

In one touch, the product enables quick, effortless Bluetooth pairing with your Android devices. You can even check to see where you last placed it.

1. Turn on the Bluetooth function on an Android device configured with a Google account.

2. Remove the headphones (L (left) and R (right)) from the charging case and bring them close to the Android device.

   

3. Touch the pairing notification that appears on your Android device.

   The voice guidance will play the message “Connected”, and the indicator lamps on the headphones will flash slowly in white. This indicates pairing was successfully completed.