Charging the headphones and charging case
-
Connect the included USB charging cable (USB Type-C side) to the battery jack of the charging case.
- The included USB charging cable is designed for exclusive use with the product. Do not use any other USB charging cable.
- When inserting the USB charging cable into the USB port or battery jack, insert it directly (horizontally).
- USB Type-A
- USB Type-C
-
After placing the headphones in the charging case, close the cover.
- When charging the headphones, make sure the indicator lamps on the headphones light up. If they do not light up, remove the headphones and place them in the case again.
-
Connect the included USB charging cable (USB Type-A side) to the computer to start charging.
- While charging, the indicator lamp on the charging case lights/flashes as follows. (It may take several seconds for the indicator lamp to light.)
- Indicator lamp
Indicator lamp Status Flashing orange -> Flashing yellow -> Flashing green Charging
(The indicator lamp flashes orange when the battery level is low and changes to yellow then green as the battery level increases.)Lights in green for 7 seconds, and then turns off Charging complete Flashing orange (twice) Battery has no power Flashing orange quickly Charging error[1] Flashing red Charging failure[2] [1] The charging case or headphones may be hot. Allow the temperature of the product to cool sufficiently before charging in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight.
[2] Discontinue use of the product and contact your local Audio-Technica dealer for repair.
-
When charging is complete, disconnect the USB charging cable (USB Type-A side) from the computer.
-
Disconnect the USB charging cable (USB Type-C side) from the product’s battery jack.
![]() |
|
---|